It’s pretty much a given that if you’re buying any type of Android smartphone, you’ll have internal GPS built into the phone. This allows smartphones to use navigational apps, such as Google Maps, location services to properly tag your geo-location across apps, and other uses. However, not all GPS sensors are built equal: they have different precision and features. In some cases, it may be the hardwares fault that the GPS sensor isn’t working properly, especially in some of the older devices that first started to incorporate this feature. However, nowadays, poor GPS reception or performance could be based on system settings, current ROM installed, or other easily fixed issues. We’ll show you how you can improve your GPS performance on your Android device!
First and foremost, make sure you’ve got your GPS is enabled on your device. Head to Settings > Location Access. In there, you’ll want to make sure that GPS Satellites and Access to my location are turn on/check off.
Calibrate your Compass
One of the things that might be the issue to your GPS accuracy is an improperly calibrated compass. If this is the case, that means that your device is getting improper orientation information which will cause issues when using navigational apps. In order to fix this, you’ll need to calibrate your Android’s compass.
An easy fix is to download GPS Essentials and go to the compass section. If it’s not working properly, you can easily press the menu button and select Calibrate. It will walk you through some quick steps to calibrate your compass and should only take a few moments.
Diagnose your issue
Using the same app from calibrating your compass, GPS Essentials, you can also diagnose to see whether it’s an issue with the software or hardware side of things.
You can use GPS Essentials to see how many GPS satellites are currently within range of your device. If you’re unable to get the GPS signal, the app can easily tell you in a graphical manner whether it is because of hardware/software (if there are a good number of satellites in range, say 8 to 10) or whether you’re just currently out of range of any GPS satellites at the moment.
Reset your GPS Data
Sometimes your device will get “stuck” on certain GPS satellites, even if they’re not within range, and this will cause you to either have weak or non-existent signals. A good fix to fix this is to clear your GPS data and to start collecting data over from scratch. For this, GPS Status & ToolBox will let you flush and re-download all your GPS data and re-acquire proper satellites within range.
In the App, head to Manage A-GPS State, tap on the Reset Data, and then tap on the Download button. After this, you should be able to fire up any type of app that uses GPS and see a better lock. One of the downsides, however, is that the fix isn’t permanent. You may have to wipe your data again and re-download it if you continue to have your GPS acting up.
Flash a new ROM
While this is a little bit more extensive than the other fixes, it could fix your GPS issues. Some firmware just doesn’t play the best with GPS sensors and flashing a new ROM might fix your issues and give you a more precise GPS signal. You’ll need an unlocked and rooted phone, so if you haven’t done so already, search our site for specific guides on how to do it for your device. If you’ve already got your device unlocked and ROM, be sure to check around to see if there is a specific ROM that might help you out.
Another option, which may cure the GPS woes, in flashing a new radio to your device. This is a bit trickier than just simply flashing a ROM, so be sure to check out the developer community over at XDA Developer Forums, check to see if your device has other radios available and that they have been tested by the community.
Always makes sure to back up your data before you attempt to flash a new ROM or radio to your device.
Do you have any other tweaks to help improve your GPS accuracy? If so, share them in the comments!
View the Original article
http://indomp3.asia
Tidak ada komentar:
Posting Komentar