Replace T-Cell Galaxy Note three N900T to Android 4.4.2 KitKat with Wicked Customized ROM 2014

Replace T-Cell Galaxy Note three N900T to Android 4.4.2 KitKat with Wicked Customized ROM 2014

WICKED is a debloated TouchWiz based ROM with Android 4.4.2 KitKat for the T-Cellular Galaxy Observe three SM-N900T. That still retains all Samsung features and lots of more added for a greater total TouchWiz expertise! Expect better battery life, smoother UI, much less lag and the standard WICKED stability & performance.

If interested in Android 4.4.2 for other phones, check out our new Custom ROMs section. You can update T-Mobile Galaxy Note 3 N900T to WICKED Android 4.4.2 KitKat custom firmware using the tutorial below. Your T-Mobile Galaxy Note 3 N900T should be rooted and have a custom recovery installed. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery in order to flash the ROM zip file on your phone.

As you continue reading below, we will guide you through the entire process of how to install WICKED Android 4.4.2 KitKat on T-Mobile Galaxy Note 3 N900T with complete steps. Don’t forget to read all the tips below that you have to keep in mind before proceeding. Please make sure you backup all your data as given below because this tutorial will wipe your data. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get to the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

WICKED Android 4.4.2 KitKat ROM Details:

This amazing WICKED custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in WICKED is given below and we are sure you’d love to use this on your T-Mobile Galaxy Note 3 N900T:

• N900TUVUBCNB4 Base


• Aroma Installer


• Multi Themed


• Debloated


• Stock Kernel


• Deodexed


• Rooted


• CIQ Free


• Knox Free


• Unrestricted Tethering


• Rom Control


• Xposed Framework


• Wanam Xposed Module


• Viper4Android Audio


• Wifi Calling


• Zipaligned


• Extended Power Menu


• Nexus Soft Key Option


• 25 Toggle Mod


• S5 Toggle Option


• Quad Resizable MW


• Custom Animations


• Init.d Support


• Custom Shutdown QMG


• Custom Startup QMG


• Battery Tweaks


• Network Tweaks


• UI Tweaks


• Memory Optimization Tweaks


• Sd Card Tweaks


• Modified TW Launcher


• Transparent Weather Widget


• Larger Caller ID


• Build.prop Tweaks


• SuperSU


• Transparent Weather Widget


• MMS Over Wifi


• S Pen Manager


• All Font Mod


• Multiwindow Manager


• CM File Manager


• Ad Away


• Removed Easy Launcher


• Torch App


• Batch Optimized


• Themed Wallpapers


• Themed Icons


• Icon Changer


• Font Changer


• 400+ Fonts


• Nano


• Sysro


• Sysrw


• BusyBox

There are tons of useful articles and how-to guides on Team Android for the Samsung T-Mobile Galaxy Note 3, but we think you might be interested in the following posts:

Like this WICKED ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung T-Mobile Galaxy Note 3 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung T-Mobile Galaxy Note 3 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung T-Mobile Galaxy Note 3 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean and KitKat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

Should you find the above suggestions useful and they had been useful to you, please take into account giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the following web page and replace T-Mobile Galaxy Word 3 N900T to WICKED Android 4.4.2 KitKat customized firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Install Android 4.4.2 KitKat on Galaxy Word 2 N7100 with SOKP Customized Firmware 2014

Install Android 4.4.2 KitKat on Galaxy Word 2 N7100 with SOKP Customized Firmware 2014

SOKP - Sonic Open Kang Challenge - is predicated on newest Android 4.4.2 KitKat model and now accessible for the Galaxy Word 2 N7100. This firmware is designed by Sonic-Developers for those people who specially like Multitasking performance, optimum velocity audio & video high quality with most customization.

We Don’t Think you will need to install any other mods Scripts or any other third-party applications to customize this rom after installing. Firmware has Inbuilt options and settings to make customization of your Device as you like.  In-addition to This the Firmware has Real True-HD DTS Sound with Brilliant HD Display optimizations for video & Images.This is Most amazing feature which users would love. This Project is dedicated to provide High-Quality Firmwares Based on Latest Versions of Android OS. If interested in Android 4.4.2 for other phones, check out our new Custom ROMs section. You can update Galaxy Note 2 N7100 to SOKP Android 4.4.2 KitKat custom firmware using the tutorial below. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip and Google Apps zip files on your phone. Your Galaxy Note 2 should be rooted and have a custom recovery (ClockworkMod recovery / TWRP recovery) installed.

As you continue reading below, in this tutorial we will guide you through the entire process of how to install SOKP Android 4.4.2 KitKat on Galaxy Note 2 N7100 with complete steps. Don’t forget to read all the tips below that you have to keep in mind before proceeding. Please make sure you backup all your data as given below because this tutorial will wipe your data. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get to the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

SOKP Android 4.4.2 KitKat ROM Details:

This amazing SOKP custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in SOKP is given below and we are sure you’d love to use this on your Galaxy Note 2 N7100:

• Cyanogen Mod 11.00 Based.


• Option to Hide Notification Lables


• Notification Transparency


• Contextual Notification Panel Header


• Notification Power Widgets with changeable background and icon colors


• Tiles layout customization with quick pull-down,smart pull down,quick collapse.,background and icon color options


• Status Bar Customizations like Battery icon,Clock and Date,Status Bar colors


• Network Traffic Meter


• Signal Text Color,Hide Signal Bar option


• Custom Carrier Lable


• Double Tap to sleep Option


• Breathing Sms Notification


• Breathing missed cal notifications


• Breathing voice-mail Notification


• Customizable Low battery warning


• Limit the notification sound of each application


• Screen on Notification Light(enable/disable)


• Custom System Animations


• CRT Animation


• List view Animation


• Toast Animation


• IME Animations


• Multiuser Support in lock-screen security


• screen lock options


• Lock screen themes for rings and elements


• Customizable Slider Targets and Shortcuts with Eight slider Targets


• Lock Screen widgets with maximize and minimization option


• Phone encryption


• Lock Screen Notification Access control


• Lock Screen Notifications


• Customizable Lock Screen Icons


• Lock-screen Power menu


• Transparent & Blur Lock-screen


• Lock Icon Torch


• Halo floating Notifications


• Customizable Power menu with lots of options


• Advanced Display control Configure your screen colors


• Chameleon OS Active Display


• Gesture Navigations


• Chameleon OS Gesture Every where


• Customizable Navigation bar with Navigation Rings’


• Custom Progress bar make your own color full progress bar


• Slim PIE control


• Chameleon OS Identicons


• Recent View customization can chose stock or Slim recent view with memory indicators,clear all button


• Customizable recent panel color


• Build Prop mods enable disable option menu


• INIT.D mods enable disable option menu


• System Application remover


• LCD Density Changer


• Wake lock Blocker


• Suspend Action When screen goes off


• Scrolling Animations


• Disable full-screen keyboard option


• Recent ram Bar with customizations


• Media Scanner Behavior Controller


• Option To Disable FC Notifications


• Default App grip option


• Dual Pane options


• Do not disturb option


• Show notification count


• Kil app back button with customizable timeout values


• High end graphic effects option


• Dark SOKP UI


• App Permission Options


• Advanced Kernel Tweaker Instead of Performance control with lot option to control CPU & GPU


• GPS Location Fix


• Build Prop Editor


• Seeder Entropy Generator


• X-Posed Framework


• Per Application DPI


• HyBrid UI>>>Phablet And Phone UI


• Omni Duel Split Screen


• Unlimited Floating Multi window


• Network Connection Manager


• Status Bar Battery Bar


• Status Bar Brightness slider


• Cast Screen


• Screen Recorder with Audio option


• Adoptive Back light


• Privacy Guard


• Sony Xperia Z2 application like Sketch (Pen Supported),Tasks,Converter ,Car launcher.


• option to use a fully themable MMS packages. You can access from mms – settings – theme settings


• Superuser fully embedded into the build and accessed from settings menu


• Enable/disable wake up on charge option


• X-Reality Engine Personally Ported from Xperia Z2 To En-chase True HD Display


• Pure HD Theater Mode Video Rendering Enabled with High end graphic effects option


• Latest Sony Walkman Player From Xperia Z2 With Clear Audio+


• Latest Sony Movies & Album From Xperia Z2


• Digital Dolby Ported From HWAUIE ACSEND P6 k3v2oem1


• Unique DTS HD Audio System Designed By Me For True HD Sound…….Feel Your Ears Blessed.


• Audio FX Widget As Standalone Equalizer For Music ,Video,Gaming Sound.

There are tons of useful articles and how-to guides on Team Android for the Samsung Galaxy Note 2, but we think you might be interested in the following posts:

Like this SOKP ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Note 2 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 2 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Note 2 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

In case you discover the above ideas helpful and they have been helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the subsequent web page and replace Galaxy Observe 2 N7100 to SOKP Android 4.4.2 KitKat custom firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Update Galaxy Nexus I9250 to Android 4.4.2 PAC ROM KitKat Customized Firmware 2014

Update Galaxy Nexus I9250 to Android 4.4.2 PAC ROM KitKat Customized Firmware 2014

Galaxy Nexus I9250 may be updated to a brand new model PAC ROM, its called BlackPowerEdition - with Android 4.4.2 KitKat. We love this ROM because it comes with features from the CM11, AOKP and Paranoid Android. If interested in Android 4.4.2 for other phones, check out our new Customized ROMs section.

Stock and official firmware are always good, but custom ROMs make them better with new features and lots of system tweaks that are not otherwise possible. This is clearly one of the advantages of rooting your Android phone (read: Benefits of Rooting an Android Device). You can update Galaxy Nexus I9250 to PAC ROM BlackPowerEdition Android 4.4.2 KitKat custom firmware using the tutorial below. This is not an official release by Samsung/Google, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip file on your phone.

In this tutorial, we will tell you how to install PAC ROM BlackPowerEdition Android 4.4.2 KitKat ROM on Galaxy Nexus I9250 with complete steps and instructions. We also have a set of important tips that you have to keep in mind before proceeding to the tutorial on the next page. Don’t forget to backup your phone as you will have to wipe all your data during the installation process. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get on with the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

PAC ROM BlackPowerEdition Android 4.4.2 KitKat ROM Details:

This amazing PAC ROM BlackPowerEdition custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in PAC ROM BlackPowerEdition is given below and we are sure you’d love to use this on your Galaxy Nexus I9250:

• All in One Rom [Core features from PA, AOKP and CM]


• PAC in Black


• Status bar tweaks


• Quick Settings Panel tweaks


• Notification Drawer tweaks


• Lockscreen Notifications


• Active Display


• Appbar


• Gesture Anywhere


• Init.d scripts


• Build.prop Mods


• Statusbar Weather


• Recents RAM Bar


• PAC Console


• Latest Version Nightly Builds


• OTA Updates

There are tons of useful articles and how-to guides on Team Android for the Samsung Galaxy Nexus, but we think you might be interested in the following posts:

Like this PAC ROM BlackPowerEdition ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Nexus USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Nexus properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Nexus USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Nexus backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

Should you find the above ideas useful they usually have been useful to you, please consider giving us a +1 or LIKE to thank us!

All set and prepared? Good. Now, let’s proceed with the tutorial on the following web page and replace Galaxy Nexus I9250 to PAC ROM BlackPowerEdition Android 4.4.2 KitKat customized firmware.

 

View the Original article

How one can Install CandyKat Android 4.4.2 on Nexus 5 KitKat Custom Firmware 2014

How one can Install CandyKat Android 4.4.2 on Nexus 5 KitKat Custom Firmware 2014

This is CandyKat. Constructed straight from CM sources with Android 4.4.2 KitKat and with commits from a variety of different sources/ROMs. The devs needed to give the customers a fun, totally customizable ROM.

They aim to add more features as this project progresses. They have also come up with the Candy Sweetener Pack. This is an Aroma installer that is full of delicious treats. Inspired by the CandyShop thread on XDA it has everything from glow dots to halo mods. If interested in Android 4.4.2 for other phones, check out our new Custom ROMs section. Stock and official firmware are always good, but custom ROMs make them better with new features and lots of system tweaks that are not otherwise possible. This is clearly one of the advantages of rooting your Android phone (read: Benefits of Rooting an Android Device). You can update Nexus 5 to Android 4.4.2 CandyKat KitKat custom firmware using the tutorial below. This is not an official release by LG/Google, but just a custom ROM which would require a custom recovery like ClockworkMod and your phone to be rooted in order to flash the ROM zip and Google Apps zip files on your phone.

In this tutorial, we will tell you how to install Android 4.4.2 CandyKat KitKat ROM on Nexus 5 with complete steps and instructions. We also have a set of important tips that you have to keep in mind before proceeding to the tutorial on the next page. Don’t forget to backup your phone as you will have to wipe all your data during the installation process. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get on with the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Android 4.4.2 CandyKat KitKat ROM Details:

This amazing CandyKat custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in CandyKat is given below and we are sure you’d love to use this on your Nexus 5:

• HALO


• Dark UI (Mms, Dialer, InCallUI, Non-Intrusive, Documents, Calendar, Contacts, DeskClock, SystemUI)


• Candy Sweetener


• Custom Candy Images


• Battery LED Customization


• Customizable Quick Settings tiles


• Custom Battery Icons


• LockScreen Targets/Widgets


• Multi-Window


• Lockscreen Blur, Transparency and Rotation


• Quick launch QuickSettings tiles from status bar


• Center/Color Clock


• Google ID Dialer


• Non-Intrusive Dialer Option


• Screen Record w/ Mic Support

There are tons of useful articles and how-to guides on Team Android for the LG Nexus 5, but we think you might be interested in the following posts:

Like this CandyKat ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

LG Nexus 5 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for LG Nexus 5 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download LG Nexus 5 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Nexus backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean and KitKat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

In the event you find the above ideas helpful and they had been useful to you, please consider giving us a +1 or LIKE to thank us!

All set and prepared? Good. Now, let’s proceed with the tutorial on the next page and update Nexus 5 to Android 4.4.2 CandyKat KitKat customized firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

New Root XXU1ANCE Android 4.4.2 on Galaxy S5 G900F Official Firmware 2014

New Root XXU1ANCE Android 4.4.2 on Galaxy S5 G900F Official Firmware 2014

Here is a simple information on the way to root XXU1ANCE Android 4.4.2 firmware on the Galaxy S5 G900F - the LTE version. This amazing new phone has just launched earlier at the moment all over the world and we already have a whole information on tips on how to root this phone.

XXU1ANCE Android 4.4.2 is one of the two firmware builds that are available initially for the Galaxy S5 G900F variant of the device. Why should you root? Read: Benefits of rooting an Android device. You can root XXU1ANCE Android 4.4.2 on Galaxy S5 G900F KitKat official firmware using the tutorial below. Please make sure your phone is on this firmware version by going to Settings > About phone.

As you continue reading further, we will guide you through the entire process of how to root Galaxy S5 G900F on XXU1ANCE Android 4.4.2 KitKat firmware using ODIN. Make sure you backup all your data before trying out the root method tutorial below because we don’t want you to lose anything. Rooting will allow you to install root apps on your phone, i.e Titanium Backup. Read our list of the essential root apps you should install! Also you should be aware that rooting your phone will completely void you warranty, so please know well what you are getting into. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Root Galaxy S5 SM-G900F – CF-Root Method Details:

A few important things to note here. This CF-Auto-Root method has been only tested on the official XXU1ANCE Android 4.4.2 KitKat firmware for the Galaxy S5 SM-G900F — so before you continue, please go to Settings > About device > Model number to confirm you are on the exact model.

You might find these following Galaxy S5 G900F related articles interesting:

For those who are not sure about CF-Root, please read the following two paragraphs for a quick intro to the root package:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Samsung Galaxy S5 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S5 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S5 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

Should you find the above suggestions useful and they had been useful to you, please think about giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next web page and root XXU1ANCE Android 4.4.2 on Galaxy S5 G900F official firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

New Root XXU1ANCF Android 4.4.2 on Galaxy S5 G900F Inventory Firmware 2014

New Root XXU1ANCF Android 4.4.2 on Galaxy S5 G900F Inventory Firmware 2014

If your new Samsung Galaxy S5 G900F got here with the XXU1ANCF Android 4.4.2 firmware and you would like to root it, then this is the proper information for you. We've got a complete information on easy methods to root XXU1ANCF Android 4.4.2 which would will let you set up root apps and access system information on your phone.

Why should you root? Read: Benefits of rooting an Android device. You can root XXU1ANCF Android 4.4.2 on Galaxy S5 G900F KitKat official firmware using the tutorial below. Please make sure your phone is on this firmware version by going to Settings > About phone. A number of root tutorials will be coming up very soon for this new Samsung Galaxy S5.

As you continue reading further, we will guide you through the entire process of how to root Galaxy S5 G900F on XXU1ANCF Android 4.4.2 KitKat firmware using ODIN. Make sure you backup all your data before trying out the root method tutorial below because we don’t want you to lose anything. Rooting will allow you to install root apps on your phone, i.e Titanium Backup. Read our list of the essential root apps you should install! Also you should be aware that rooting your phone will completely void you warranty, so please know well what you are getting into. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Root Galaxy S5 SM-G900F – CF-Root Method Details:

A few important things to note here. This CF-Auto-Root method has been only tested on the official XXU1ANCF Android 4.4.2 KitKat firmware for the Galaxy S5 SM-G900F — so before you continue, please go to Settings > About device > Model number to confirm you are on the exact model.

You might find these following Galaxy S5 G900F related articles interesting:

For those who are not sure about CF-Root, please read the following two paragraphs for a quick intro to the root package:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Samsung Galaxy S5 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S5 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S5 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

In the event you find the above suggestions helpful they usually had been helpful to you, please take into account giving us a +1 or LIKE to thank us!

All set and prepared? Good. Now, let’s proceed with the tutorial on the next web page and root XXU1ANCF Android 4.4.2 on Galaxy S5 G900F official firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Root T-Cell Galaxy S5 G900T on Android 4.4.2 Stock Firmware with CF-Auto-Root 2014

Root T-Cell Galaxy S5 G900T on Android 4.4.2 Stock Firmware with CF-Auto-Root 2014

T-Mobile Galaxy S5 SM-G900T was launched at the moment and we already have this entire tutorial on the way to gain root access on this phone.

This guide will help you to root T-Mobile Galaxy S5 G900T on official Android 4.4.2 KitKat firmware that comes pre-installed on this device. There will be future Android updates and luckily, this root method will work with all of them. How? Because we will be using CF-Auto-Root tool that works independent of the firmware build and Android version the phone is running on. Why should you root? Read: Benefits of rooting an Android device. You can root T-Mobile Galaxy S5 G900T on Android 4.4.2 KitKat official firmware using the tutorial below. Please note, this tutorial is NOT firmware dependent, so it will work with future Android updates as well.

As you continue reading further, we will guide you through the entire process of how to root Android 4.4.2 on Samsung Galaxy S5 G900T using ODIN. Make sure you backup all your data before trying out the root method tutorial below because we don’t want you to lose anything. Rooting will allow you to install root apps on your phone, i.e Titanium Backup. Read our list of the essential root apps you should install! Also you should be aware that rooting your phone will completely void you warranty, so please know well what you are getting into. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Root T-Mobile Galaxy S5 G900T – CF-Root Method Details:

A few important things to note here. CF-Auto-Root method has been only tested on the offiical Android 4.4.2 KitKat firmware for the T-Mobile Galaxy S5 SM-G900T — so before you continue, please go to Settings > About device > Model number to confirm you are on the exact model.

You might find these following T-Mobile Galaxy S5 G900T related articles interesting:

For those who are not sure about CF-Root, please read the following two paragraphs for a quick intro to the root package:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Samsung T-Mobile Galaxy S5 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung T-Mobile Galaxy S5 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download T-Mobile Galaxy S5 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

When you discover the above suggestions helpful and they were helpful to you, please contemplate giving us a +1 or LIKE to thank us!

All set and prepared? Good. Now, let’s proceed with the tutorial on the subsequent page and root Samsung T-Mobile Galaxy S5 G900T on Android 4.4.2 official firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

How one can Root Galaxy S5 G900H on Android 4.4.2 KitKat Official Firmware 2014

How one can Root Galaxy S5 G900H on Android 4.4.2 KitKat Official Firmware 2014

Now you can root Galaxy S5 G900H on Android 4.4.2 KitKat firmware. This is the 3G variant of the Samsung Galaxy S5 and has the mannequin quantity SM-G900H to it.

Most interesting thing is, even before people getting hands on the new Galaxy S5 G900H, Chainfire has come up with its root tool – CF-Auto-Root. We have already covered how to root Galaxy S5 LTE G900F and T-Mobile Galaxy S5 G900T. This root guide is pretty similar to any other Samsung device so if you have followed our previous guides, this wouldn’t be much different. Galaxy S5 G900H variant is now has a compatible with CF-Auto-Tool to gain root access on your device. Why anyone should Root? Read: Benefits of rooting an Android device. You can root Galaxy S5 G900H on Android 4.4.2 KitKat official firmware using the tutorial below. Please note, this tutorial is NOT firmware dependent, so it will work with future Android updates as well.

As you continue reading further, we will guide you through the entire process of how to root Android 4.4.2 on Samsung Galaxy S5 G900H using ODIN. Make sure you backup all your data before trying out the root method tutorial below because we don’t want you to lose anything. Rooting will allow you to install root apps on your phone, i.e Titanium Backup. Read our list of the essential root apps you should install! Also you should be aware that rooting your phone will completely void you warranty, so please know well what you are getting into. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Root Galaxy S5 SM-G900H – CF-Root Method Details:

A few important things to note here. CF-Auto-Root method has been only tested on the official Android 4.4.2 KitKat firmware for the Galaxy S5 SM-G900H — so before you continue, please go to Settings > About device > Model number to confirm you are on the exact model.

You might find these following Galaxy S5 G900H related articles interesting:

For those who are not sure about CF-Root, please read the following two paragraphs for a quick intro to the root package:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Samsung Galaxy S5 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S5 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S5 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial below and root Samsung Galaxy S5 G900H on Android 4.4.2 official firmware.

HOW TO: Root Samsung Galaxy S5 G900H with Android 4.4.2 KitKat Firmware

We have put together a detailed step-by-step instructions guide for how to root Android 4.4.2 on Galaxy S5 G900H. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.

Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.



To Remember:

• This root method tutorial is only for Galaxy S5 SM-G900H. Please do not try on any other Galaxy S5 variants.


• Make sure you backup all your data in your phone before proceeding as a precaution.


• This root method works with Android 4.4.2 firmwares and all future Android updates as well.


• Your Galaxy S5 should be on an official firmware by Samsung, not a custom ROM.

Complete Step-By-Step Instructions:

Step 1 - Download CF-Auto-Root Android 4.4.2 Package for Samsung Galaxy S5 to your computer and extract the zip file.

Step 2 - Download ODIN v3.09 which will help you to root Android 4.4.2 on Samsung Samsung Galaxy S5 G900H.

Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 - Make sure you have your Samsung Galaxy S5 USB drivers installed on your computer.

Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.

• Click on ‘PDA’ / ‘AP’ and select the file ‘CF-Auto-Root-k3g-k3gxx-smg900h.tar.md5‘.

Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options, if not already.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.

Step 11 - After you see the home screen, unplug your phone from the computer.

NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.

OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:

Step 11 - Pull out the battery to turn OFF the phone forcefully.

Step 12 - Now boot (turn ON your phone) with Volume Up + Home + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.

That’s it! Your Samsung Galaxy S5 has now been rooted on Android 4.4.2 official software update. Check for the SuperSU app in your apps list to verify.

To make sure you have correctly installed the above root method and it’s working, verify with Root Checker as given in the link.

Should you run into any issues, be at liberty to drop us a comment beneath and we'll reply you back ASAP with the fix or the solution to your problem.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Replace Galaxy Ace S5830 to Android 4.4.2 AOKP KitKat Customized ROM 2014

Replace Galaxy Ace S5830 to Android 4.4.2 AOKP KitKat Customized ROM 2014

Here is a very stable Android 4.4.2 KitKat customized ROM for the Galaxy Ace S5830, due to AOKP. Now you can try out and use KitKat on your Galaxy Ace cellphone with stock Android and epxeriene what all has Google included in Android 4.4.2.

Samsung has dropped support for any new Android versions for this phone, but you can still install custom ROMs like this AOKP firmware nad give a new life to this Android phone. If interested in Android 4.4.2 for other phones, check out our new Custom ROMs section. You can update Galaxy Ace S5830 to AOKP Android 4.4.2 KitKat custom firmware using the tutorial below. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip and Google Apps zip files on your phone.

As you read further, we will guide you how to backup your important data, some other important tips and then tell you how to install AOKP Android 4.4.2 KitKat ROM on Galaxy Ace S5830 with complete steps using CWM recovery. We always recommend you to backup your data first because your data will wiped when installing this custom ROM. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial below.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

AOKP Android 4.4.2 KitKat ROM Details:

This amazing AOKP custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in AOKP is given below and we are sure you’d love to use this on your Galaxy Ace S5830:

• RIL


• USB mass storage


• Sensors


• Wi-FI


• Bluetooth (not tested, but it should work!)


• Camera (taking pictures)


• Sound


• Display (and touch screen)


• GPS (not tested, but it should work!)


• AOKP features

What doesn’t work:

There are tons of useful articles and how-to guides on Team Android for the Samsung Galaxy Ace, but we think you might be interested in the following posts:

• Android 4.4.2 Custom ROMs: For a complete collection of Galaxy Ace S5830 custom ROMs, click here!

Like this AOKP ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Ace USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Ace properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Ace USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Ace backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the subsequent page and replace Galaxy Ace S5830 to AOKP Android 4.4.2 KitKat customized firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Replace T-Cellular Galaxy S5 G900T to UVU1ANCH Android 4.4.2 Official Firmware 2014

Replace T-Cellular Galaxy S5 G900T to UVU1ANCH Android 4.4.2 Official Firmware 2014

T-Mobile Galaxy S5 G900T can now be updated with UVU1ANCH Android 4.4.2 firmware. This telephone has just released earlier as we speak and it comes with this Android 4.4.2 KitKat build.

Many of you would want to root Galaxy S5 G900T, but while doing so, you might have messed up something and want to get back to the stock KitKat firmware. This is where this UVU1ANCH Android 4.4.2 firmware guide will help you. You can easily update Galaxy S5 G900T to UVU1ANCH Android 4.4.2 KitKat official test firmware– and also root Galaxy S5 G900T phone on this firmware.

As you continue reading below, we will guide you how to install UVU1ANCH Android 4.4.2 KitKat on T-Mobile Galaxy S5 G900T using ODIN. We have also given some tips on how to backup your phone data and have given some other important tips. Don’t forget to backup all your apps and personal data as a precaution. We don’t want anyone losing their data due to any issues. For the rooting tutorial, we have given the link below for a complete tutorial. Let’s continue with the tutorial now.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

UVU1ANCH Android 4.4.2 Firmware Details:

Model: SM-G900TModel name: GALAXY S5
Country: USA (T-Mobile)
Version: Android 4.4.2
Changelist: 964333
Build date: Wed, 26 Mar 2014 04:28:24 +0000
Product Code: TMBPDA: G900TUVU1ANCH
CSC: G900TTMB1ANCH
MODEM: G900TUVU1ANCH

You might find these following Galaxy S5 G900T related articles interesting:

If you plan on rooting this phone or are still confused for why to root T-Mobile Galaxy S5 G900T, read: Benefits of Rooting Your Android Device.

T-Mobile Galaxy S5 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for T-Mobile Galaxy S5 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download T-Mobile Galaxy S5 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

When you discover the above ideas useful and they were useful to you, please contemplate giving us a +1 or LIKE to thank us!

All set and prepared? Good. You can now head over to the next web page and update Galaxy S5 G900T to Android 4.4.2 UVU1ANCH official firmware update.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article