official android 4.3 for galaxy s3 i9300

Oprek Room And Root XXUGND2 Android 4.3 on Galaxy S3 I9300 Official Firmware

A whole guide on how one can root XXUGND2 Android 4.three on the Galaxy S3 I9300 could be found below. As soon as you replace to a new firmware, root operations and access disappear hence it's important to root your gadget again.

This is why we have this new root tutorial for the XXUGND2 Android 4.3 firmware update released for the Samsung Galaxy S3. Samsung devices tend to be the ones with most simple rooting methods due to number of reasons. While reading this guide, you should know that rooting your device voids the warranty. What is so special about rooting? Read: Benefits of rooting an Android device. You can now root Galaxy S3 I9300 with XXUGND2 Android 4.3 firmware using ODIN with our tutorial given below.

As you continue reading below, we will guide you through the entire process of how to root XXUGND2 Android 4.3 Jelly Bean on Galaxy S3 I9300 with complete steps. Apart from this, we have some data backup tips for your phone and other important tips below. Read our list of the essential root apps available! The following tips are important as they will help the rooting procedure to go smooth without any issues. Let’s get on with the tutorial now.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Root XXUGND2 Android 4.3 – CF-Root Method Details:

For those who do not know about CF-Auto-Root:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

NOTE: Your Samsung Galaxy S III I9300 should be on the Android 4.3 build XXUGND2 firmware in order to apply this root method. Please make sure your phone is on the said firmware from Settings > About phone.

You can later update Galaxy S3 I9300 to the latest ClockworkMod Recovery: How to Install ClockworkMod Touch Recovery 6.0.1.2 on Galaxy S3 I9300.

Samsung Galaxy S3 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S3 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S3 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. You can now head over to the following web page and root Galaxy S3 I9300 on XXUGND2 Android 4.3 official firmware update.

Don’t forget to leave your feedback under and observe us on Twitter or grow to be our Facebook fan for all the most recent updates

Posted by:http://androidframes.blogspot.com/

Writted by: totor

android 4.4 for galaxy note 10.1 – DownloadOfficial Firmware

N8000XXUDND5 Android 4.4.2 KitKat test firmware has just been leaked a few hours ago for the Galaxy Note 10.1 N8000 (WiFi only model). Samsung never updated to any of the previous Android upgrades, but looks like they will be rolling out the official Android 4.4.2 KitKat software update for this tablet. It is expected, that the final update will be released sometime in May/June.  Not sure what new features this new leaked firmware brings, but we have posted the manual firmware file for installation below. For those having problems or any kind of issues during installation, we also have a tutorial on how to install this KitKat firmware on your tablet manually: How to Update Galaxy Note 10.1 N8000 to XXUDND5 Android 4.4.2 KitKat Firmware. This Android 4.4.2 build XXUDND5 firmware is an unbranded firmware (and leaked), that you can install on your tablet. Galaxy Note 10.1 XXUDND5 Android 4.4.2 KitKat latest firmware update can be downloaded along with the complete tutorials from the links below.

As you read further, we have tutorial links of how to install XXUDND5 Android 4.4.2 on Galaxy Note 10.1 N8000 using ODIN. You do not need to have a rooted tablet or ClockworkMod recovery since we are using ODIN which is way better than depending on a custom recovery (CWM recovery). Continue reading below for more updates and tutorials on the latest N8000XXUDND5 firmware.

Here are the firmware details of N8000XXUDND5 Android 4.4.2 for Samsung Galaxy Note 10.1 N8000:
Model: GT-N8000
Country: Open Europe
Version: Android 4.4.2
Changelist: 1430589
Build date: Wed, 23 Apr 2014 03:09:45 +0000
Product Code: OXA
PDA: N8000XXUDND5
CSC: N8000OXADND5
MODEM: N8000XXUDND2
Download Android 4.4.2 XXUDND5 for Galaxy Note 10.1: Download Android 4.4.2 XXUDND5.
TUTORIAL: The official test firmware tutorial is now available and you can update Galaxy Note 10.1 N8000 to XXUDND5 Android 4.4.2 KitKat firmware with ODIN! Go here for the full tutorial!
For those who want to root Galaxy Note 10.1 N8000 on Android 4.4.2 XXUDND5, read here for the tutorial!

Don’t forget to leave your feedback under and observe us on Twitter or grow to be our Facebook fan for all the most recent updates

Posted by:http://androidframes.blogspot.com/

Writted by: totor

galaxy tab 3 8.0 deals T315 LTE OfficialFirmware

Samsung Galaxy Tab 3 8.0 LTE T315 has been greeted with XWUANA1 Android 4.2.2 firmware update which boosts this tablet to Android 4.2.2 Jelly Bean. For now this is the most latest build to reach this device yet. Samsung KIES and OTA (over-the-air) update system will be having this build already but only in a few regions. Their is a great chance you wont be able to see this firmware pop up on your Samsung KIES or even OTA. Due to this very reason, we decided to compile a complete tutorial on how you can update your Galaxy Tab 3 8.0 LTE. Not only will you get all the steps required from this guide but you would be able to gain some hints and behind the scene tricks too. You can easily update Galaxy Tab 3 8.0 LTE T315 to XWUANA1 Android 4.2.2 Jelly Bean using the tutorial below and root Galaxy Tab 3 8.0 LTE. You can now also try out CM11 ROM with Android 4.4.2 KitKat on this tablet!
As you continue reading below, we will guide you through the entire process of how to install XWUANA1 Android 4.2.2 on Galaxy Tab 3 8.0 LTE T315 using ODIN. Don’t forget to backup all your apps and personal data as you never know when you might end up with a problem. We have laid out helpful tips through out the guide so make sure to keep an eye out for them. Your data’s safety is our first priority so we would advise you once again on backing it up before proceeding. Let’s continue with the tutorial below.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Galaxy Tab 3 8.0 LTE – XWUANA1 Android 4.2.2 Firmware Details:

Model: SM-T315
Model name: GALAXY Tab 3 8.0 LTE
Country: Baltic
Version: Android 4.2.2
Changelist: 2453351
Build date: Mon, 20 Jan 2014 08:21:29 +0000
Product Code: SEB
PDA: T315XWUANA1
CSC: T315OXXANA2
MODEM: T315XXUANA1
You might find these following Galaxy Tab 3 8.0 LTE T315 related articles interesting:
If you plan on rooting this tablet or are still confused for why to root Galaxy Tab 3 8.0 LTE T315, read: Benefits of Rooting Your Android Device.

Samsung Galaxy Tab 3 8.0 LTE USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the Android 4.2.2 USB drivers for Samsung Galaxy Tab 3 8.0 LTE properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Tab 3 8.0 LTE USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:
Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your tablet, we strongly recommend you to also backup using that as it creates a complete image of your existing tablet set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android tablet to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.
2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?
4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your tablet is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!
All set and ready? Good. You can now head over to the next page and install XWUANA1 Android 4.2.2 firmware on Galaxy Tab 3 8.0 LTE T315.

Don’t forget to leave your feedback under and observe us on Twitter or grow to be our Facebook fan for all the most recent updates

Posted by:http://androidframes.blogspot.com/

Writted by: totor

Android 4.4.2 KitKat official firmware with Important Tips

Galaxy Note 3 Neo N750S can now be updated to KSU1BND3 Android 4.4.2 firmware update — the new KitKat firmware that has started rolling out to users just a little earlier today. Samsung has not yet announced or released the official KitKat software update for the International version of Galaxy Note 3 Neo, but we guess that is soon to follow. You can download N750SKSU1BND3 Android 4.4.2 KitKat firmware on your device directly from OTA or with Samsung KIES — and if you still can’t find, you can follow our manual installation guide. You can now easily install KSU1BND3 Android 4.4.2 on Galaxy Note 3 Neo N750S and even root this firmware! This is not a custom ROM, this is a official firmware update by Samsung.
As you read further, we will guide you through the entire process of how to update Galaxy Note 3 Neo N750S to KSU1BND3 Android 4.4.2 KitKat official firmware using ODIN. We have all the tips on how to backup your Android apps and other phone data, also for a smooth flash we have written tips along the tutorial which you can easily follow. This is an unbranded firmware, which means you may or may not find some extra carrier apps in your phone. Let’s continue with the tutorial.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

KSU1BND3 Android 4.4.2 Firmware Details:

Model: SM-N750S
Model name: GALAXY Note 3 Neo LTE
Country: Unknown
Version: Android 4.4.2
Changelist: 1248519
Build date: Tue, 08 Apr 2014 07:15:54 +0000
Product Code: SKC
PDA: N750SKSU1BND3
CSC: N750SSKC1BND3
MODEM: N750SKSU1BND2
If you plan on rooting this phone or are still confused for why to root Galaxy Note 3 Neo N750S, read: Benefits of Rooting Your Android Device.
You may be interested in the following Galaxy Note 3 Neo related articles:

Samsung Galaxy Note 3 Neo USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 3 Neo properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Note 3 Neo USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:
Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.
2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!
All set and ready? Good. You can now head over to the next page and update Galaxy Note 3 Neo N750S to KSU1BND3 Android 4.4.2 KitKat official firmware.

Don’t forget to leave your feedback under and observe us on Twitter or grow to be our Facebook fan for all the most recent updates!

Posted by: http://androidframes.blogspot.com/

Writted by: totor

Android 4.4.2 for Samsung Galaxy Note 3 Neo with TUTORIAL

N750SKSU1BND3 Android 4.4.2 KitKat firmware can now be downloaded for the Galaxy Note 3 Neo N750S in Korea. This KitKat firmware has just been released today and we already have a manual installation file with us, thanks to SamMobile. Not everyone will be able to see this firmware on Samsung KIES because of the regional difference, but you can install KSU1BND3 Android 4.4.2 manually on your phone if you have the Korean variant (SM-N750S) and have not received the firmware update. We have posted the manual firmware file for installation with a complete tutorial / guide as well: How to Update Galaxy Note 3 Neo N750S to KSU1BND3 Android 4.4.2 KitKat Firmware. This Android 4.4.2 build KSU1BND3 firmware is an unbranded firmware, that you can install on your phone. Galaxy Note 3 Neo KSU1BND3 Android 4.4.2 KitKat latest firmware update can be downloaded along with the complete tutorials from the links below.

As you read further, we have tutorial links of how to install KSU1BND3 Android 4.4.2 on Galaxy Note 3 Neo N750S using ODIN. You do not need to have a rooted phone or ClockworkMod recovery since we are using ODIN which is way better than depending on a custom recovery (CWM recovery). Continue reading below for more updates and tutorials on the latest N750SKSU1BND3 firmware.

Here are the firmware details of N750SKSU1BND3 Android 4.4.2 for Samsung Galaxy Note 3 Neo N750S:
Model: SM-N750S
Model name: GALAXY Note 3 Neo LTE
Country: Unknown
Version: Android 4.4.2
Changelist: 1248519
Build date: Tue, 08 Apr 2014 07:15:54 +0000
Product Code: SKC
PDA: N750SKSU1BND3
CSC: N750SSKC1BND3
MODEM: N750SKSU1BND2
Download Android 4.4.2 KSU1BND3 for Galaxy Note 3 Neo: Download Android 4.4.2 KSU1BND3.
TUTORIAL: The official firmware tutorial is now available and you can update Galaxy Note 3 Neo N750S to KSU1BND3 Android 4.4.2 KitKat firmware with ODIN! Go here for the full tutorial!

Don’t forget to leave your feedback under and observe us on Twitter or grow to be our Facebook fan for all the most recent updates!

Posted by: http://androidframes.blogspot.com/

Writted by: totor

OSE Android 4.4.2 KitKat custom firmware Backup and Other Important Tips

OSE ROM is a modified version on Slim ROM and is based on the source code of Slim ROMs and latest Android 4.4.2 KitKat. You get all of the Slim ROMS  features plus some exckusive OSE features too. Remember that this ROM is in beta stages right now so bugs are more likely to show up. If interested in Android 4.4.2 for other phones, check out our new Custom ROMs section. You can update AT&T Galaxy S2 Skyrocket SGH-I727 to OSE Android 4.4.2 KitKat custom firmware using the tutorial below. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip and Google Apps zip files on your phone.
In this tutorial, we will tell you how to install OSE Android 4.4.2 KitKat ROM on AT&T Galaxy S2 Skyrocket SGH-I727 with complete steps using CWM recovery. We also have several tips on how to backup your phone data and also some more tips that you have to keep in mind before proceeding to the tutorial on the next page. You will have to wipe your previous personal data and apps as usual when installing custom ROMs. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s begin with the tutorial below.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

OSE Android 4.4.2 KitKat ROM Details:

This amazing OSE custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in OSE is given below and we are sure you’d love to use this on your Samsung AT&T Galaxy S2 Skyrocket SGH-I727:

• Based On Slim
• DarkUI Toggle Theme
• Multi-Window
• PIE Navigation
• Custom Navbar Options
• Custom Clock Options
• Custom Battery Options
• CRT Animation Control
• Init.d Support
• Init.d Tweaks
• All Features in Slim V3
• HALO
• System App Remover
• OnTheFly DensityChanger
• App Ops
• OmniSwitch
• Lockscreen Notifications
• Build Prop Mods
• Suspend Actions
• Wake Lock Blockers

There are tons of useful articles and how-to guides on Team Android for the Samsung AT&T Galaxy S2 Skyrocket, but we think you might be interested in the following posts:

• Android 4.2.2 Custom ROMs: For a complete collection of AT&T Galaxy S2 Skyrocket SGH-I727 custom ROMs, click here!

Like this OSE ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung AT&T Galaxy S2 Skyrocket USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S2 Skyrocket properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S2 Skyrocket USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:
Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung AT&T Galaxy S2 Skyrocket backup data to HTC One X.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.
2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!
All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update AT&T Galaxy S2 Skyrocket SGH-I727 to OSE Android 4.4.2 KitKat custom firmware.

Don’t forget to leave your feedback under and observe us on Twitter or grow to be our Facebook fan for all the most recent updates!

Posted by: http://androidframes.blogspot.com/

Writted by: totor

Root Galaxy Tab 3 8.zero T311 3G on Android 4.2.2 Official Firmware 2014

Root Galaxy Tab 3 8.zero T311 3G on Android 4.2.2 Official Firmware 2014

A complete guide on find out how to root Galaxy Tab three 8.zero T311 is offered on Staff Android. You may easily root this Android tablet on the latest Android 4.2.2 Jelly Bean official firmware updates.

Galaxy Tab 3 8.0 T311 is the 3G variant of the tablet and after rooting, you can make the best use of the big screen with amazing root apps and tools. Consider reading our guide on Benefits of rooting an Android device. You can now root Android 4.2.2 Jelly Bean on Galaxy Tab 3 8.0 T311 official firmware using the tutorial below.

As you read further, we will guide you through the entire process of how to root Galaxy Tab 3 8.0 T311 on Android 4.2.2 official firmware. It is not really necessary, but please make sure you backup your tablet as a precaution and also read all the important tips given below before proceeding to the tutorial. Read our list of the essential root apps available! Also make sure, your tablet is updated to the latest most software update available for this tablet on Samsung KIES. Let’s continue below to the tutorial. Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Root Galaxy Tab 3 8.0 T311 – CF-Auto-Root Details:

A few important things to note here. CF-Auto-Root method has been only tested on the official Android 4.2.2 Jelly Bean firmwares for the Galaxy Tab 3 8.0 T311 — so before you continue, please go to Settings > About device > Model number to confirm you are on the exact model. You might find these following Galaxy Tab 3 8.0 T311 related articles interesting:

For those who do not know about CF-Auto-Root:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Samsung Galaxy Tab 3 8.0 USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the Android 4.2.2 USB drivers for Samsung Galaxy Tab 3 8.0 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Tab 3 8.0 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X. If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your tablet, we strongly recommend you to also backup using that as it creates a complete image of your existing tablet set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android tablet to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?

3. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your tablet is locked to a carrier, unless we have specified the carrier name or device model.

All set and ready? Good. Now, let’s proceed with the tutorial on the following page and root Galaxy Tab 3 8.zero T311 on Android 4.2.2 official firmware

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Install Android 4.4.2 CM11 to Galaxy Tab 3 8.0 T311 3G KitKat Customized Firmware 2014

Install Android 4.4.2 CM11 to Galaxy Tab 3 8.0 T311 3G KitKat Customized Firmware 2014

Wish to try out the brand new Android 4.4.2 KitKat on the Galaxy Tab 3 8.zero T311 3G? Now we have simply the ROM for you - CM11 (CyanogenMod 11) - brings you the new KitKat update unofficially to your Andorid tablet.

Samsung seems to have no plans of launching the official Android 4.4.2 updates this month for the Galaxy Tab 3 8.0, so this is where how you can install and experience KitKat yourself. All you need is to have a rooted Galaxy Tab 3 8.0 T311. You can update Galaxy Tab 3 8.0 T311 to Android 4.4.2 CM11 KitKat custom firmware using the tutorial below.

In this tutorial, we will tell you how to install Android 4.4.2 CM11 KitKat ROM on Galaxy Tab 3 8.0 T311 with complete steps using CWM recovery. We also have several tips on how to backup your tablet data and also some more tips that you have to keep in mind before proceeding to the tutorial on the next page. You will have to wipe your previous personal data and apps as usual when installing custom ROMs. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s begin with the tutorial below.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Android 4.4.2 CM11 KitKat ROM Details:

For those who are new to CyanogenMod, please read the following:

CyanogenMod (pronounced sigh-AN-oh-jen-mod), is a customized, aftermarket firmware distribution for several Android devices (See above for supported devices & how to install CyanogenMod on said devices). Based on the Android Open Source Project, CyanogenMod is designed to increase performance and reliability over Android-based ROMs released by vendors and carriers such as Google, T-Mobile, HTC, etc. CyanogenMod also offers a variety of features & enhancements that are not currently found in these versions of Android.

NOTE: This CM11 custom ROM based on Android 4.4.2 KitKat can be installed on Samsung Galaxy Tab 3 8.0 SM-T311 — the WiFi + 3G version.

There are tons of useful articles and how-to guides on Team Android for the Samsung Galaxy Tab 3 8.0, but we think you might be interested in the following posts:

Like this CM11 ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your tablet now. We will be waiting for your feedback! Please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Tab 3 8.0 USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Tab 3 8.0 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Tab 3 8.0 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Tab 3 8.0 backup data to Motorola Xoom.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your tablet, we strongly recommend a backup using that as it creates a complete image of your existing tablet set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android tablet to the computer? You may need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

In case you discover the above suggestions useful and so they had been useful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update Galaxy Tab 3 8.0 T311 to Android 4.4.2 CM11 KitKat customized firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Methods to Install Galaxy Tab three 8.zero T311 XWUANC1 Android 4.2.2 Official Firmware 2014

Methods to Install Galaxy Tab three 8.zero T311 XWUANC1 Android 4.2.2 Official Firmware 2014

Samsung Galaxy Tab three 8.0 T311 may be updated to the newest XWUANC1 Android 4.2.2 firmware which is the newest Jelly Bean software program replace available for this Android pill so far.

This guide will take you through each step of the process on how to install XWUANC1 Android 4.2.2 firmware on this Galaxy Tab 3 8.0 tablet with the most easiest instructions. You can easily update Galaxy Tab 3 8.0 T311 to XWUANC1 Android 4.2.2 Jelly Bean using the tutorial below and root Galaxy Tab 3 8.0. For any queries, you can always drop us a comment below. You can also try out an Android 4.4.2 KitKat custom ROM for the Galaxy Tab 3 8.0 T311 3G.

As you continue reading below, we will guide you through the entire process of how to install XWUANC1 Android 4.2.2 on Galaxy Tab 3 8.0 T311 using ODIN. Don’t forget to backup all your apps and personal data as you never know when you might end up with a problem. We have laid out helpful tips through out the guide so make sure to keep an eye out for them. Check again to make sure that all of the data is accounted for and nothing is left behind. Let’s continue with the tutorial below.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Galaxy Tab 3 8.0 – XWUANC1 Android 4.2.2 Firmware Details:

Model: SM-T311
Model name: GALAXY Tab 3 8.0 3G
Country: Thailand
Version: Android 4.2.2
Changelist: 2586679
Build date: Fri, 07 Mar 2014 11:28:01 +0000
Product Code: THL
PDA: T311XWUANC1
CSC: T311OLBANC1
MODEM: T311DXUAMK1

You might find these following Galaxy Tab 3 8.0 T311 related articles interesting:

If you plan on rooting this tablet or are still confused for why to root Galaxy Tab 3 8.0 T311, read: Benefits of Rooting Your Android Device.

Samsung Galaxy Tab 3 8.0 USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the Android 4.2.2 USB drivers for Samsung Galaxy Tab 3 8.0 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Tab 3 8.0 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your tablet, we strongly recommend you to also backup using that as it creates a complete image of your existing tablet set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android tablet to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your tablet is locked to a carrier, unless we have specified the carrier name or device model.

Should you discover the above suggestions useful they usually have been useful to you, please think about giving us a +1 or LIKE to thank us!

All set and prepared? Good. You can now head over to the next web page and install XWUANC1 Android 4.2.2 firmware on Galaxy Tab three 8.0 T311.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Root XWUANC1 Android 4.2.2 on Galaxy Tab 3 8.0 T311 Inventory Firmware 2014

Root XWUANC1 Android 4.2.2 on Galaxy Tab 3 8.0 T311 Inventory Firmware 2014

A information on learn how to root XWUANC1 Android 4.2.2 on the Galaxy Tab3 8.0 T311 is given below. Only a whereas again, we posted on learn how to replace this pill to this XWUANC1 Android 4.2.2 Jelly Bean firmware and now you may simply root it as well. Why root?

Read: Benefits of rooting an Android device. And it will allow you to play around with system files and install root apps on your tablet which means extra functionality! CF-Auto-Root will be the main tool involved in this guide as well as ODIN. You can now root XWUANC1 Android 4.2.2 on Galaxy Tab3 8.0 T311 official firmware using the tutorial below.

As you read further, we will guide you through the entire process of how to root Galaxy Tab3 8.0 T311 on XWUANC1 Android 4.2.2 Jelly Bean official firmware. It is not really necessary, but please make sure you backup your tablet as a precaution and also read all the important tips given below before proceeding to the tutorial. Read our list of the essential root apps available! Let’s continue below to the tutorial.



Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Root Galaxy Tab3 8.0 T311 – CF-Auto-Root Details:

A few important things to note here. CF-Auto-Root method has been only tested on the official Android 4.2.2 Jelly Bean firmwares for the Galaxy Tab3 8.0 T311 — so before you continue, please go to Settings > About device > Model number to confirm you are on the exact model.

You might find these following Galaxy Tab3 8.0 T311 related articles interesting:

For those who do not know about CF-Auto-Root:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Samsung Galaxy Tab3 8.0 USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the Android 4.2.2 USB drivers for Samsung Galaxy Tab3 8.0 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Tab3 8.0 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your tablet, we strongly recommend you to also backup using that as it creates a complete image of your existing tablet set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android tablet to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your tablet is locked to a carrier, unless we have specified the carrier name or device model.

All set and ready? Good. Now, let’s proceed with the tutorial on the following web page and root XWUANC1 Android 4.2.2 on Galaxy Tab3 8.zero T311 official firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Install Android 4.4.2 KitKat on Galaxy Word 2 N7100 with SOKP Customized Firmware 2014

Install Android 4.4.2 KitKat on Galaxy Word 2 N7100 with SOKP Customized Firmware 2014

SOKP - Sonic Open Kang Challenge - is predicated on newest Android 4.4.2 KitKat model and now accessible for the Galaxy Word 2 N7100. This firmware is designed by Sonic-Developers for those people who specially like Multitasking performance, optimum velocity audio & video high quality with most customization.

We Don’t Think you will need to install any other mods Scripts or any other third-party applications to customize this rom after installing. Firmware has Inbuilt options and settings to make customization of your Device as you like.  In-addition to This the Firmware has Real True-HD DTS Sound with Brilliant HD Display optimizations for video & Images.This is Most amazing feature which users would love. This Project is dedicated to provide High-Quality Firmwares Based on Latest Versions of Android OS. If interested in Android 4.4.2 for other phones, check out our new Custom ROMs section. You can update Galaxy Note 2 N7100 to SOKP Android 4.4.2 KitKat custom firmware using the tutorial below. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip and Google Apps zip files on your phone. Your Galaxy Note 2 should be rooted and have a custom recovery (ClockworkMod recovery / TWRP recovery) installed.

As you continue reading below, in this tutorial we will guide you through the entire process of how to install SOKP Android 4.4.2 KitKat on Galaxy Note 2 N7100 with complete steps. Don’t forget to read all the tips below that you have to keep in mind before proceeding. Please make sure you backup all your data as given below because this tutorial will wipe your data. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get to the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

SOKP Android 4.4.2 KitKat ROM Details:

This amazing SOKP custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in SOKP is given below and we are sure you’d love to use this on your Galaxy Note 2 N7100:

• Cyanogen Mod 11.00 Based.


• Option to Hide Notification Lables


• Notification Transparency


• Contextual Notification Panel Header


• Notification Power Widgets with changeable background and icon colors


• Tiles layout customization with quick pull-down,smart pull down,quick collapse.,background and icon color options


• Status Bar Customizations like Battery icon,Clock and Date,Status Bar colors


• Network Traffic Meter


• Signal Text Color,Hide Signal Bar option


• Custom Carrier Lable


• Double Tap to sleep Option


• Breathing Sms Notification


• Breathing missed cal notifications


• Breathing voice-mail Notification


• Customizable Low battery warning


• Limit the notification sound of each application


• Screen on Notification Light(enable/disable)


• Custom System Animations


• CRT Animation


• List view Animation


• Toast Animation


• IME Animations


• Multiuser Support in lock-screen security


• screen lock options


• Lock screen themes for rings and elements


• Customizable Slider Targets and Shortcuts with Eight slider Targets


• Lock Screen widgets with maximize and minimization option


• Phone encryption


• Lock Screen Notification Access control


• Lock Screen Notifications


• Customizable Lock Screen Icons


• Lock-screen Power menu


• Transparent & Blur Lock-screen


• Lock Icon Torch


• Halo floating Notifications


• Customizable Power menu with lots of options


• Advanced Display control Configure your screen colors


• Chameleon OS Active Display


• Gesture Navigations


• Chameleon OS Gesture Every where


• Customizable Navigation bar with Navigation Rings’


• Custom Progress bar make your own color full progress bar


• Slim PIE control


• Chameleon OS Identicons


• Recent View customization can chose stock or Slim recent view with memory indicators,clear all button


• Customizable recent panel color


• Build Prop mods enable disable option menu


• INIT.D mods enable disable option menu


• System Application remover


• LCD Density Changer


• Wake lock Blocker


• Suspend Action When screen goes off


• Scrolling Animations


• Disable full-screen keyboard option


• Recent ram Bar with customizations


• Media Scanner Behavior Controller


• Option To Disable FC Notifications


• Default App grip option


• Dual Pane options


• Do not disturb option


• Show notification count


• Kil app back button with customizable timeout values


• High end graphic effects option


• Dark SOKP UI


• App Permission Options


• Advanced Kernel Tweaker Instead of Performance control with lot option to control CPU & GPU


• GPS Location Fix


• Build Prop Editor


• Seeder Entropy Generator


• X-Posed Framework


• Per Application DPI


• HyBrid UI>>>Phablet And Phone UI


• Omni Duel Split Screen


• Unlimited Floating Multi window


• Network Connection Manager


• Status Bar Battery Bar


• Status Bar Brightness slider


• Cast Screen


• Screen Recorder with Audio option


• Adoptive Back light


• Privacy Guard


• Sony Xperia Z2 application like Sketch (Pen Supported),Tasks,Converter ,Car launcher.


• option to use a fully themable MMS packages. You can access from mms – settings – theme settings


• Superuser fully embedded into the build and accessed from settings menu


• Enable/disable wake up on charge option


• X-Reality Engine Personally Ported from Xperia Z2 To En-chase True HD Display


• Pure HD Theater Mode Video Rendering Enabled with High end graphic effects option


• Latest Sony Walkman Player From Xperia Z2 With Clear Audio+


• Latest Sony Movies & Album From Xperia Z2


• Digital Dolby Ported From HWAUIE ACSEND P6 k3v2oem1


• Unique DTS HD Audio System Designed By Me For True HD Sound…….Feel Your Ears Blessed.


• Audio FX Widget As Standalone Equalizer For Music ,Video,Gaming Sound.

There are tons of useful articles and how-to guides on Team Android for the Samsung Galaxy Note 2, but we think you might be interested in the following posts:

Like this SOKP ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Note 2 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 2 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Note 2 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

In case you discover the above ideas helpful and they have been helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the subsequent web page and replace Galaxy Observe 2 N7100 to SOKP Android 4.4.2 KitKat custom firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Update Galaxy Nexus I9250 to Android 4.4.2 PAC ROM KitKat Customized Firmware 2014

Update Galaxy Nexus I9250 to Android 4.4.2 PAC ROM KitKat Customized Firmware 2014

Galaxy Nexus I9250 may be updated to a brand new model PAC ROM, its called BlackPowerEdition - with Android 4.4.2 KitKat. We love this ROM because it comes with features from the CM11, AOKP and Paranoid Android. If interested in Android 4.4.2 for other phones, check out our new Customized ROMs section.

Stock and official firmware are always good, but custom ROMs make them better with new features and lots of system tweaks that are not otherwise possible. This is clearly one of the advantages of rooting your Android phone (read: Benefits of Rooting an Android Device). You can update Galaxy Nexus I9250 to PAC ROM BlackPowerEdition Android 4.4.2 KitKat custom firmware using the tutorial below. This is not an official release by Samsung/Google, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip file on your phone.

In this tutorial, we will tell you how to install PAC ROM BlackPowerEdition Android 4.4.2 KitKat ROM on Galaxy Nexus I9250 with complete steps and instructions. We also have a set of important tips that you have to keep in mind before proceeding to the tutorial on the next page. Don’t forget to backup your phone as you will have to wipe all your data during the installation process. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get on with the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

PAC ROM BlackPowerEdition Android 4.4.2 KitKat ROM Details:

This amazing PAC ROM BlackPowerEdition custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in PAC ROM BlackPowerEdition is given below and we are sure you’d love to use this on your Galaxy Nexus I9250:

• All in One Rom [Core features from PA, AOKP and CM]


• PAC in Black


• Status bar tweaks


• Quick Settings Panel tweaks


• Notification Drawer tweaks


• Lockscreen Notifications


• Active Display


• Appbar


• Gesture Anywhere


• Init.d scripts


• Build.prop Mods


• Statusbar Weather


• Recents RAM Bar


• PAC Console


• Latest Version Nightly Builds


• OTA Updates

There are tons of useful articles and how-to guides on Team Android for the Samsung Galaxy Nexus, but we think you might be interested in the following posts:

Like this PAC ROM BlackPowerEdition ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Nexus USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Nexus properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Nexus USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Nexus backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

Should you find the above ideas useful they usually have been useful to you, please consider giving us a +1 or LIKE to thank us!

All set and prepared? Good. Now, let’s proceed with the tutorial on the following web page and replace Galaxy Nexus I9250 to PAC ROM BlackPowerEdition Android 4.4.2 KitKat customized firmware.

 

View the Original article

How one can Install CandyKat Android 4.4.2 on Nexus 5 KitKat Custom Firmware 2014

How one can Install CandyKat Android 4.4.2 on Nexus 5 KitKat Custom Firmware 2014

This is CandyKat. Constructed straight from CM sources with Android 4.4.2 KitKat and with commits from a variety of different sources/ROMs. The devs needed to give the customers a fun, totally customizable ROM.

They aim to add more features as this project progresses. They have also come up with the Candy Sweetener Pack. This is an Aroma installer that is full of delicious treats. Inspired by the CandyShop thread on XDA it has everything from glow dots to halo mods. If interested in Android 4.4.2 for other phones, check out our new Custom ROMs section. Stock and official firmware are always good, but custom ROMs make them better with new features and lots of system tweaks that are not otherwise possible. This is clearly one of the advantages of rooting your Android phone (read: Benefits of Rooting an Android Device). You can update Nexus 5 to Android 4.4.2 CandyKat KitKat custom firmware using the tutorial below. This is not an official release by LG/Google, but just a custom ROM which would require a custom recovery like ClockworkMod and your phone to be rooted in order to flash the ROM zip and Google Apps zip files on your phone.

In this tutorial, we will tell you how to install Android 4.4.2 CandyKat KitKat ROM on Nexus 5 with complete steps and instructions. We also have a set of important tips that you have to keep in mind before proceeding to the tutorial on the next page. Don’t forget to backup your phone as you will have to wipe all your data during the installation process. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get on with the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Android 4.4.2 CandyKat KitKat ROM Details:

This amazing CandyKat custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in CandyKat is given below and we are sure you’d love to use this on your Nexus 5:

• HALO


• Dark UI (Mms, Dialer, InCallUI, Non-Intrusive, Documents, Calendar, Contacts, DeskClock, SystemUI)


• Candy Sweetener


• Custom Candy Images


• Battery LED Customization


• Customizable Quick Settings tiles


• Custom Battery Icons


• LockScreen Targets/Widgets


• Multi-Window


• Lockscreen Blur, Transparency and Rotation


• Quick launch QuickSettings tiles from status bar


• Center/Color Clock


• Google ID Dialer


• Non-Intrusive Dialer Option


• Screen Record w/ Mic Support

There are tons of useful articles and how-to guides on Team Android for the LG Nexus 5, but we think you might be interested in the following posts:

Like this CandyKat ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

LG Nexus 5 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for LG Nexus 5 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download LG Nexus 5 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Nexus backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich, Jelly Bean and KitKat.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

In the event you find the above ideas helpful and they had been useful to you, please consider giving us a +1 or LIKE to thank us!

All set and prepared? Good. Now, let’s proceed with the tutorial on the next page and update Nexus 5 to Android 4.4.2 CandyKat KitKat customized firmware.

Posted by: http://gosspot.com/

Writted by: totor

View the Original article

Update AT&T Galaxy S3 I747 with C-RoM Android 4.4.2 KitKat Custom Firmware

C-RoM for AT&T Galaxy S3 SGH-I747 is based on Android 4.4.2 KitKat firmware, directly built from the AOSP sources. This ROM keeps the stock KitKat look and UI as created by Google, there are no fancy animations or transitions but includes some really wonderous customization options so that you can make the device yours completely. Its very stable, fast and smooth ROM. If interested in Android 4.4.2 for other phones, check out our new Custom ROMs section. You can update AT&T Galaxy S3 SGH-I747 to C-RoM Android 4.4.2 KitKat custom firmware using the tutorial below. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip and Google Apps zip files on your phone. You can also try out PAC-rom for this Android phone!

In this tutorial, we will tell you how to install C-RoM Android 4.4.2 KitKat ROM on AT&T Galaxy S3 SGH-I747 with complete steps using CWM recovery. We also have several tips on how to backup your phone data and also some more tips that you have to keep in mind before proceeding to the tutorial on the next page. You will have to wipe your previous personal data and apps as usual when installing custom ROMs. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s begin with the tutorial below.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

C-RoM Android 4.4.2 KitKat ROM Details:

This amazing C-RoM custom ROM comes with tons of new features and is based on Android 4.4.2 KitKat. A quick list of the main features in C-RoM is given below and we are sure you’d love to use this on your Samsung AT&T Galaxy S3 SGH-I747:

• Moved Halo Icon back to on Statusbar ( Not sure if it works good on HDPI devices).
• Launch the msim settings when the new card dialog appears
• Disable keyguard widget frame
• Don’t hide baseband on dual sim devices
• Port BatteryBar
• Frameworks: Fix linked volume does not persist after reboot.
• Change notification background from holo to kitkat grey
• Fix possible ANR and navigation bar freeze
• Frameworks: do not kill favorite recent apps
• Frameworks: fix possible NPE + and missing expandable panel correction
• Fixed Recent Clear Butons colors
• Don’t register methods when there’s nothing to register.
• Get rid of noise during boot.
• InCallUI: Fix potential NPE
• Launcher3: Icon pack support
• OmniSwitch: added icon pack support

There are tons of useful articles and how-to guides on Team Android for the Samsung AT&T Galaxy S3, but we think you might be interested in the following posts:

Like this C-RoM ROM based on the latest Android 4.4.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung AT&T Galaxy S3 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S3 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy S3 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung AT&T Galaxy S3 backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update AT&T Galaxy S3 SGH-I747 to C-RoM Android 4.4.2 KitKat custom firmware.

View the Original article

N9005XXUEND3 Android 4.4.2 KitKat for Galaxy Note 3 LTE N9005 – Download Official Firmware Now

N9005XXUEND3 Android 4.4.2 firmware for Samsung Galaxy Note 3 N9005 LTE was released today. This is a new build of the official KitKat firmware for this Android phone. There are no major changes in this firmware, neither has Samsung mentioned any new features that could have made their way to Galaxy Note 3 with this XXUEND3 Android 4.4.2 firmware update. The manual installation files have just been released which you can flash on your phone using ODIN. For those having problems or any kind of issues during installation, we already have a tutorial on how to install this KitKat firmware on your phone manually: How to Update Galaxy Note 3 LTE N9005 to XXUEND3 Android 4.4.2 KitKat Firmware. This Android 4.4.2 build XXUEND3 firmware is an unbranded firmware, which means anyone with an unlocked Galaxy Note 3 N9005 can easily install this. Galaxy Note 3 LTE XXUEND3 Android 4.4.2 KitKat firmware update can be downloaded along with the complete tutorials from the links below.

As you read further, we have tutorial links of how to install XXUEND3 Android 4.4.2 on Galaxy Note 3 LTE N9005 using ODIN. You do not need to have a rooted phone or ClockworkMod recovery since we are using ODIN which is way better than depending on a custom recovery (CWM recovery). Continue reading below for more updates and tutorials on the latest N9005XXUEND3 firmware.

Here are the firmware details of N9005XXUEND3 Android 4.4.2 for Samsung Galaxy Note 3 LTE N9005:

Model: SM-N9005Model name: GALAXY Note 3 LTE
Country: Netherlands
Version: Android 4.4.2
Changelist: 1168347
Build date: Mon, 14 Apr 2014 08:38:48 +0000
Product Code: PHNPDA: N9005XXUEND3
CSC: N9005PHNEND1
MODEM: N9005XXUENC2

Download Android 4.4.2 XXUEND3 for Galaxy Note 3 LTE: Download Android 4.4.2 XXUEND3.

TUTORIAL: The full official firmware tutorial is now available and you can update Galaxy Note 3 LTE N9005 to XXUEND3 Android 4.4.2 KitKat firmware with ODIN! Go here for the full tutorial!

For those who want to root Galaxy Note 3 LTE N9005 on Android 4.4.2 XXUEND3, read here for the tutorial!

View the Original article

Update Galaxy Grand 2 Duos G7102 to XXUAND1 Android 4.3 Official Firmware

You can now download XXUAND1 Android 4.3 for Galaxy Grand 2 Duos G7102 and we have a full tutorial on how to install this official Jelly Bean firmware update. XXUAND1 Android 4.3 Jelly Bean is the latest firmware build that has been released so far for the Galaxy Grand 2 Duos G7102.This is an unbranded firmware, which means there will be no extra carrier apps installed with this firmware and anyone with an unlocked Galaxy Grand 2 can install this firmware. G7102XXUAND1 is an official firmware update, not a modified or custom ROM. You can easily update Galaxy Grand 2 Duos G7102 to XXUAND1 Android 4.3 Jelly Bean official firmware and root Galaxy Grand 2.

As you continue reading below, we will guide you how to install XXUAND1 Android 4.3 Jelly Bean on Galaxy Grand 2 Duos G7102 using ODIN. We have also given some tips on how to backup your phone data and have given some other important tips. Don’t forget to backup all your apps and personal data as a precaution. We don’t want anyone losing their data due to any issues. Let’s continue with the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

XXUAND1 Android 4.3 Firmware Details:

Model: SM-G7102Model name: GALAXY Grand 2 DUOS
Country: India
Version: Android 4.3
Changelist: 2635347
Build date: Tue, 08 Apr 2014 06:03:58 +0000
Product Code: INUPDA: G7102XXUAND1
CSC: G7102ODDAND1
MODEM: G7102DDUAML3

You might find these following Galaxy Grand 2 Duos G7102 related articles interesting:

If you plan on rooting this phone or are still confused for why to root Galaxy Grand 2 Duos G7102, read: Benefits of Rooting Your Android Device.

Samsung Galaxy Grand 2 Duos USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Grand 2 Duos properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Grand 2 Duos USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. You can now head over to the next page and update Galaxy Grand 2 Duos G7102 to Android 4.3 XXUAND1 official firmware update.

View the Original article

Root XXUAND1 Android 4.3 on Galaxy Grand 2 Duos G7102 Official Firmware

Like every new firmware update that gets released, here is how to root XXUAND1 Android 4.3 firmware on the Galaxy Grand 2 Duos G7102. Samsung does not want you to root your Android phones, but there are more advantages in doing it. Read: Benefits of rooting an Android device. If you are like us who love to play with system files and tweak settings, rooting your Galaxy Grand 2 Duos G7102 is a must for you. You can root XXUAND1 Android 4.3 on Galaxy Grand 2 Duos G7102 official firmware using the tutorial below. Rooting will allow you to install root apps on your phone, i.e Titanium Backup. Read our list of the essential root apps you should install!

As you continue reading further, we will guide you through the entire process of how to root Galaxy Grand 2 Duos G7102 on XXUAND1 Android 4.3 Jelly Bean firmware update using ODIN. Make sure you backup all your data before trying out the root method tutorial below because we don’t want you to lose anything. Also you should be aware that rooting your phone will completely void you warranty, so please know well what you are getting into. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Root Galaxy Grand 2 Duos SM-G7102 – CF-Root Method Details:

A few important things to note here. CF-Auto-Root method has been only tested on the official Android 4.3 Jelly Bean firmware for the Galaxy Grand 2 Duos SM-G7102 — so before you continue, please go to Settings > About device > Model number to confirm you are on the exact model.

You might find these following Galaxy Grand 2 Duos G7102 related articles interesting:

For those who are not sure about CF-Root, please read the following two paragraphs for a quick intro to the root package:

CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.

NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Samsung Galaxy Grand 2 Duos USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Grand 2 Duos properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Download Samsung Galaxy Grand 2 Duos USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy Note backup data to HTC One X.

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and root XXUAND1 Android 4.3 on Samsung Galaxy Grand 2 Duos G7102 official firmware.

View the Original article